User`s manual

AXIS 210/211 - Focusing

Setting the Password

1. When accessing the AXIS 210/211 for the first

time, the ‘Configure Root Password’ dialog

will be displayed on the screen.

2. Enter a password and then re-enter it, to

confirm the spelling. Click OK.

3. The ‘Enter Network Password’ dialog will appear. Enter the User name: root

Note: The default administrator user name root is permanent and cannot be deleted.

4. Enter the password as set in step 2 above, and click OK. If the password is lost, the

AXIS 210/211 must be reset to the factory default settings. See page 38.

5. If required, click Yes to install the AXIS Media Control (AMC.) You will need

administrator rights on the computer to do this.

Focusing

To focus the AXIS 210, simply turn the adjustment ring on the lens until the focus is

satisfactory. To focus the AXIS 211, follow the instructions below.

1. From the Basic Configuration page in the setup tools, open the Focus adjustment

page.

2. Set the DC-Iris to Disabled

and click Save.

3. Unscrew the zoom puller on

the lens by turning it

anti-clockwise. Adjust the

zoom setting as required.

Re-tighten the zoom puller.

4. Unscrew the focus puller on

the lens. Adjust the focus as

required. Re-tighten the focus

puller.

5. From the Focus adjustment page, set the DC-Iris to Enabled and click Save.

AXIS 211

Focus puller

Zoom puller

(Tele/wide)