User`s manual

17
AXIS 207 - Configuration
Overlay Settings
Use these settings to include a text,
date and time overlay.
The text, date and time overlay is
included on one line at the top or
bottom of the video image.
Video Stream
Define the maximum video stream time per session in seconds, minutes or hours. When
the set time has expired, a new stream can be started by refreshing the page in the Web
browser. For unlimited video stream time, set this value to 0. Note that the maximum video
stream time does not apply to clients connecting via multicast.
The frame rate allowed to each viewer can also be limited, to avoid bandwidth problems
on the network. To allow the highest available frame rate, set to 0.
Test
For a preview of the image before saving, click Test. When satisfied with the settings, click
Save. Please note that the preview image will be in JPEG format, even though the settings
are valid both for Motion JPEG and MPEG-4.
Please refer to the online help for more information .
Advanced - Camera Settings
These pages include different settings for fine-tuning the video image.
To compensate for the lighting conditions, the white balance and exposure control can be
adjusted.
Please see the online help for further instructions on these settings.
Low Light Behavior
Exposure priority defines the balance between image quality and the frame rate. Higher
image quality may reduce frame rate and increase motion blur. A prioritized frame rate
may instead increased image noise. Depending on requirements, use this to give higher
priority to the image quality or to the frame rate.
Text, date and
time overlay