User`s manual

31
AXIS 206 - System Options
• Passphrase - The passphrase can contain up to 31 characters (a-z, A-Z and 0-9) and is
supported by Windows and most brands of access point. In 64-bit WEP, the Passphrase
generates 4 different keys. For 128-bit WEP, only 1 key is generated, which is then
replicated for all 4 keys. Check that the generated keys are identical to those in your
access point - if not they must be entered manually.
Active Transmit Key - This selects which of the 4 keys the AXIS 206W uses when
transmitting. The key should be changed every now and then, to increase the security of
the wireless connection.
Click Save to save your changes.
SMTP (email)
Enter the host names or addresses for your primary and secondary mail servers in the fields
provided. This allows the camera to send IP address change notification messages via
email.
UPnP
TM
The AXIS 206 includes support for UPnP
TM
, which is enabled by default. If also enabled on
your computer (Windows ME or XP), the camera will automatically be detected and a new
icon will be added to “My Network Places.”
Note: UPnP
TM
must also be enabled on your workstation. To do this, open the Control Panel from the Start Menu
and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking
Services section. Click Details and then select UPnP
TM
as the service to add.
LED Settings
The Status indicator LED on the front of the camera can be set to flash at a configurable
interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED
behavior, see page 9, or see the online help.
UPnP
TM
is a certification mark of the UPnP
TM
Implementers Corporation.