User`s manual

User’s Manual Appendix B: The Parameter List
2
--- TCP/IP MENU
TCP_ENB. : YES
TCP/IP Enabled
INT_ADDR. : 0 0 0 0
Internet Address
DEF_ROUT. : 0 0 0 0
Default Router Address
(0.0.0.0 for no router)
NET_MASK. : 0 0 0 0
Net Mask
(e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
LPD_BANN. : OFF (OFF, AUTO, LAST)
LPD Banner Page Mode
DHCP_ENB. : YES
DHCP Enabled
BOOTP_ENB. : YES
BOOTP Enabled
RARP_ENB. : YES
RARP Enabled
DNS_ENB. : YES
DNS Enabled
DNS_ADDR1. : 0 0 0 0
Primary DNS Server Address
DNS_ADDR2. : 0 0 0 0
Secondary DNS Server Address
DOMAIN_NAME. :
Domain Name (Defines the domain to which the AXIS OfficeBasic
belongs)
SLP_SCOPE_LIST.: DEFAULT
Defines the SLP scope to which the AXIS OfficeBasic belongs.
RTN_OPT. : NO
Reverse Telnet Options Enabled
RTEL_PR1. : 0
PR1 Reverse Telnet Port Number
--- SNMP MENU
READ_COM. : public
Read Community
WRT_COM. : pass
Read/Write Community
TRAPADDR. : 0 0 0 0
Trap Address
TRAP_COM. : public
Trap Community
SYS_NAME. :
System Name
SNMP_AUT. : DISABLE (DISABLE, ENABLE)
Authentication Failure Trap
TRAP_PRT. : DISABLE (DISABLE, ENABLE)
Printer Failure Trap
--- IPX MENU
FR_802_3. : YES
IEEE 802.3 Frame Type Enabled
FR_ETH_2. : YES
Ethernet II Frame Type Enabled
FR_802_2. : YES
IEEE 802.2 Frame Type Enabled
FR_SNAP. : YES
SNAP Frame Type Enabled
--- NetBIOS/NetBEUI MENU
LSLM_ENB. : YES
NetBIOS/NetBEUI Enabled
NB_FR_TYPE. : FR_AUTO (FR_AUTO, FR_802_2, FR_DIX)
NetBIOS Frame Type (Requires Restart)
LPRINT_1. : AX100086.LP1
Name Printer 1 (100086 are the last six characters of the serial number)
--- LPT1 Menu
L1_CENTR. : HISPEED (IBM_PC, STNDRD, FAST, HISPEED)
Centronics Interface Timing LPT1
L1_BSYTM. : 60
Busy Status Time-Out LPT1
(All status reporting disabled if set to 0)
L1_COMMENT. :
Optional user comment describing the printer at LPT1