User`s manual

Appendix A: Technical Specifications User’s Manual
54
Appendix A Technical Specifications
Supported Systems
Microsoft Windows: Windows 2000, Windows XP (requires firmware version 6.15 and up),
Windows NT ver. 3.5 and above, Windows 95, Windows 98.
Print Methods: Raw TCP/IP, LPD, NetBIOS/NetBEUI.
WWW: Netscape Navigator 4.0 and higher and MS Internet Explorer 4.0 and
higher.
Hardware 32 bit 100 MHz RISC Controller, 1 Mbyte Flash memory. 512 kbytes
RAM.
Logical Connection NWay support to provide auto-detection of the network speed. Running
simultaneously any combination of the supported protocols. Use of
IEEE802.2, IEEE802.3, SNAP and Ethernet II frame types
simultaneously.
Attachments RJ-45 connector (Category 5 Unshielded Twisted Pair) for 10baseT
Ethernet and 100baseTX Fast Ethernet.
Parallel Printer One IEEE 1284 compliant high-speed parallel port, 36-pin Centronics
connector. Sustained throughput over 1 Mbyte/s using NetWare. Bi-
directional support for Reverse Telnet. ECP support.
Front Panel 2 LED indicators: Power and Network.
Test button for information printouts.
Power Consumption Power provided by external supply:
Maximum 200 mA at 12 VDC. (Type PS-B, 12V, 500 mA).
Dimensions Height x Width x Depth
0.9 x 2.4 x 4.8 inches (2.4 x 6.1 x 12.1 cm)
Weight 0.22 lb. (0.1 kg)