User`s manual

Section 3: Printing from Windows 95/98/NT4/2000/XP User’s Manual
30
Adding Printers in Windows 95/98 over NetBIOS/NetBEUI using AXIS Print
Monitor
Follow the procedures below to install Axis NetBIOS/NetBEUI printer
ports on a Windows 95/98 workstation, using AXIS Print Monitor:
1. To start the Add Printer Wizard, select Settings | Printers from
the Start menu and double-click the Add Printer icon.
2. After clicking Next in the first dialog, the Wizard asks you to select
Local printer or Network printer. Select Local printer and click
Next.
3. Choose the appropriate printer driver for your printer. If the desired
printer driver appears in the displayed Manufacturers and Printers
lists, highlight your selection, click Next and proceed directly to
step 6. It is only necessary to perform steps 4 - 5 if your printer does
not appear in the model list.
Note:
4. Click the Have Disk... button. Insert the printer driver diskette/CD
that was provided with your printer, select the appropriate
diskette/CD drive and click OK.
5. Select the printer driver you want to install and click Next.
6. Select the AXIS Printer Port from the Available Ports list. The port
names appears as <name>.<port>. Here, <name> is AX followed
by the last six digits of the print server’s serial number (e.g.
AX100086) and <port> is: LP1
Click the Configure Port button.
Even if the desired printer is available in the Manufacturers
and Printers lists, you are advised to use the printer driver
provided with the printer. This assures you of the latest driver
software.