User`s manual

User’s Manual Section 3: Printing from Windows 95/98/NT4/2000/XP
21
Adding Printers in Windows 2000 and XP over TCP/IP
Follow the instructions below to use the standard Windows method
for adding a network printer in Windows 2000 and XP:
Windows XP: 1. Go to Start | Printers and Faxes and click the Add a Printer icon
to start the Add Printer Wizard. Click Next.
Windows 2000: 1. Go to Start | Settings | Printers and click the Add Printer icon
to start the Add Printer Wizard. Click Next.
2. Select the radio button Local Printer and click Next.
Important!
3. Click the Create a new port radio button and select Standard
TCP/IP Port from the list. Click Next and the Add Standard TCP/IP
Printer Port Wizard starts. Click Next.
4. Enter the name of the print server (Example: AXIS100086 or the IP
address) and click Next. Enter the Device Port you want to use:
LPT1. Click Next and Finish.
5. Select Manufacturer and Printer from the lists. Click Next. Choose
whether you want to keep the existing driver or to replace it. If you
already have the printer’s driver installed, you will be asked whether
to keep it or to replace it. Click Next.
Supply a name for the printer and choose whether you want to
make it your default printer. Click Next.
6. Choose whether you want to share the printer with other network
users. Do you want to print a test page? Select the appropriate radio
button and click Next and Finish.
Make sure that the Automatically detect and install my Plug
and Play printer checkbox is not
checked.