User`s manual

Section 2: Hardware Installation and IP address assignment User’s Manual
14
Methods for Setting
the IP Address
The IP address of your print server can be set using one of the
following methods, depending on your network operating
environment:
Automatic IP Address
assignment
Manual IP Address
assignment
Method Requiredserver/environment Comment
DHCP DHCP server
Dynamic assignment of IP addresses. See
Assign an IP Address to the Print Server, on
page 13
Method Platform Comment
arp/ping Windows
Requires the IP address for each device to
be downloaded individually. Cannot be
used over routers. See Set the IP Address
using ARP/Ping in Windows 95/98/NT/
2000/XP, on page 15
AXIS IP JumpStarter*
Windows 95, 98, NT,
2000
Axis software that allows you to find print
servers in your network and assign an IP
address to them.
See Set the IP Address using AXIS IP
JumpStarter, on page 17
* Can only be used with AXIS OfficeBasic
print servers containg firmware version
6.15
and above!
AXIS IP Installer Windows 95, 98, NT
Axis software that allows you to find print
servers in your network and assign an IP
address to them.
See Set the ip address using IPInstaller, on
page 18
Should only be used with AXIS OfficeBasic
containing firmware prior to 6.15!
DHCP must be enabled in the print server.