User`s manual

Section 5: Configuration Parameters
AXIS AFP IOP User’s Manual 41
Top Margin Back
Side
Top Margin Back Side ............................................... [Top Margin Back]
Top margin must be in the range -128 to 127. Unit is 1/300 of an inch.
Negative values indicate less top margin. This setting only affects duplex
printing.
IPDS Parser syntax (with default setting):
BACK_TOP_MARGIN = 0;
Left Margin Back
Side
Left Margin Back Side................................................ [Left Margin Back]
Left margin can be adjusted in 1/300 of an inch, and a range of -128 to
127 units is allowed. Left margin is always located at the edge of the paper
to the left of the leading edge. This setting only affects duplex printing.
IPDS Parser syntax (with default setting):
BACK_LEFT_MARGIN = 0;
Top Margin
Envelope
Top Margin Envelope ......................................... [Top Margin Envelope]
Top margin must be in the range -128 to 127. Unit is 1/300 of an inch.
Negative values indicate less top margin.
IPDS Parser syntax (with default setting):
ENVELOPE_TOP_MARGIN = 0;
• 0 [-128..+127]
• 0 [-128..+127]
• 0 [-128..+127]