User`s manual

Section 5: Configuration Parameters
AXIS AFP IOP User’s Manual 33
C27 Cassette Link Control ................................................ [c27 Tray Linking]
This option can not be controlled by the AFP IOP interface, but has to be
activated in the Lexmark [PAPER SETUP] Menu under [Tray Linking].
The paper in the two trays must be the same size in order for the linking to
function.
Note: On Optra and 4039 Plus series printers a new feature called [Tray Protect]
has been introduced. If this feature is enabled for a particular tray then the
tray linking will skip this tray, even though the paper type installed is the
same as for the other tray.
Refer to the Lexmark User manuals for more information.
C28 Coax Time Out....................................................... [c28 Coax TimeOut]
This option controls when a non-IPDS job without End of Job or Form
Feed information are forced to be printed. The value stated in the Interface
Release Time Out will always have higher priority if C28 has a value equal
to or higher than the Release Time Out. The range is from 15-255
seconds.
IPDS Parser syntax (with default setting):
COAX_C28 = 30;
• 30 [15..255] Coax Time Out