User`s manual

Section 5: Configuration Parameters
32 AXIS AFP IOP User’s Manual
C24 Automatic Function after EOB ................................[c24 EOB Function]
Used in DSC/DSE modes only and when C16 is set to 0.
IPDS Parser syntax (with default setting):
COAX_C24 = 0;
C25 Left Binding Margin ............................................[c25 Left Bind Margin]
Use this option to increase the left margin in all non-IPDS Coax modes.
The value must be specified in 1/100 inches. The range is 0..999.
IPDS Parser syntax (with default setting):
COAX_C25 = 0;
C26 Top Binding Margin........................................... [c26 Top Bind Margin]
Use this option to increase the top margin in all non-IPDS Coax modes.
The value must be specified in 1/100 inches. The range is 0..999.
IPDS Parser syntax (with default setting):
COAX_C26 = 0;
• 0 [No Function] No. If form feed is the last character in the print order execute
according to switch C21. Otherwise execute NL at end of print
order if not at column 1.
1 [Execute a FF] Yes. Automatic Form-Feed after End of print order will be exe-
cuted if position is not currently at top of form.
• 0 [0..999]
• 0 [0..999]