User`s manual

Section 5: Configuration Parameters
30 AXIS AFP IOP User’s Manual
C17 Suppress Timeout on No-Data-Loss IR .........................[c17 IR Control]
This option controls how to report special conditions such as paper-out,
toner-low etc. in DSC/DSE, LU-1 and IPDS modes.
Note: Enabling this option will force reporting of Stacked Page Counter after
pages have been printed, i.e. operation will proceed as if IPDS Stacked
Page Counter was enabled.
IPDS Parser syntax (with default setting):
COAX_C17 = 0;
or
INTERVENTION_REPLY = 0
C18 Automatic New Line at MPP+1 ....................... [c18 Auto NL at MPP+1]
Used in DSC/DSE modes only.
IPDS Parser syntax (with default setting):
COAX_C18 = 1;
C19 Additional New Line at MPP+1....................... [c19 Add. NL at MPP+1]
IPDS Parser syntax (with default setting):
COAX_C19 = 1;
•0 [Disable] No IR is sent on No-Data-Loss conditions.
1 [Enable] Send Intervention Required to the host after some time if the con-
dition continues.
0 [No] No. When carriage return is executed at MPP+1, no automatic
New Line is executed. New print position is at the beginning of the
current line.
•1 [Yes] Yes. A carriage return on MPP+1 position causes a New Line to be
executed. New print position is at the beginning of the next line.
0 [No] No. When New Line is executed at MPP+1, then no automatic
New Line is executed. New print position is at the beginning of the
next line.
•1 [Yes] Yes. When New Line is executed at MPP+1, then an extra New
Line is executed. New print position is at the beginning of the line
which follows the next line. Used in DSC/DSE modes only.