User`s manual

Section 5: Configuration Parameters
AXIS AFP IOP User’s Manual 27
C10 Screen Copy Screen Size...........................................[c10 LC Screen Size]
Select screen size for local copy operation. For some controllers this value
must be correct for the communication to start.
Used in DSC/DSE modes only.
IPDS Parser syntax (with default setting):
COAX_C10 = 3;
C11 Extended Attribute Buffer (EAB) ............................... [c11 EAB Control]
Extended attribute buffer is used for character attributes, APL printing
etc.
Used in DSC/DSE modes only.
IPDS Parser syntax (with default setting):
COAX_C11 = 0;
C12 Characters Per Inch (CPI).........................................[c12 Char.per Inch]
Selects how many characters to print per inch and the default font. In
LU1-1 mode this sets the default power on value. In DSC/DSE modes
this setting cannot be overwritten.
IPDS Parser syntax (with default setting):
COAX_C12 = 0;
0 [960] 960 bytes
1 [1920] 1920 bytes
2 [2560] 2560 bytes
• 3 [3440] 3440 bytes
4 [3564] 3564 bytes
• 0 [Enable] Yes. Enable extended attribute buffer.
1 [Disable] No. Do not use extended attribute buffer.
• 0 =[10 CPI] 10-pitch Courier (13-pitch, Gothic-text when COR active).
1 =[12 CPI] 12-pitch Prestige (15-pitch, Gothic-text when COR active).
2 =[15 CPI] 15-pitch Gothic-text (20-pitch, Gothic-text when COR active).
3 =[17 CPI] 17-pitch Courier (27-pitch, Gothic-text when COR active).