User`s manual

ii AXIS AFP IOP User’s Manual
About this manual
This manual will guide you through a simple step-by-step installation and
setup procedure. It is divided into six sections:
General
Information
About the AXIS AFP IOP Printer Interface, how it works, where to use it,
and its main features.
Front Panel
Operation
How to operate the Lexmark printer’s front panel when the AXIS AFP
IOP is installed.
Utility Program The tool for reconfiguring and upgrading the software in the AXIS AFP
IOP.
Configuration
Parameters
A complete listing of the parameters available for configuration of the
AXIS AFP IOP.
Download/Upload Downloading the configuration program and the fonts to the AXIS AFP
IOP, as well as uploading the current configuration.
Program Setup Setup of the Utility Program output function.
The manual applies to the AXIS AFP IOP with firmware release 1.00 and
subsequent releases until otherwise notified.
This manual primarily describes operation of the AXIS AFP IOP installed
in Lexmark Optra series of printers. The AXIS AFP IOP also supports
Lexmark 4039 and 4039 Plus series of printers, with some minor
differencies in the front panel operation.
Every care has been taken in the preparation of this manual; if you detect
any inaccuracies or omissions, please inform us at the address on the back
cover. Axis Communications AB cannot be held responsible for any
technical or typographical errors and reserves the right to make changes to
the product and manuals without prior notice.