User`s manual

Section 3: Utility Program Operation
AXIS AFP IOP User’s Manual 15
Section 3
Utility Program Operation
The AFP utility program is a tool for reconfiguring and upgrading the
software in your AFP IOP interface which enables you to :
1. Upgrade main program and fonts in the interface. (Note that the
standard package does not contain the software files for the main pro-
gram and font upgrade. Contact your local dealer for further informa-
tion).
2. Change or create complete setups related to the host and to the
printer, and save/restore setup files on disk (user and application tai-
lored configurations).
3. Change single settings related to the host and for the printer.
Note: All these settings can be changed from the Lexmark front panel or by
using the IPDS Parser function as well.
The program consists of two files:
IOPUTI.EXE (Main program)
IOPUTI.HLP (Help file used by the program)
The files can be copied onto the PC harddisk in a directory made for the
purpose, for instance C:\IOPUTI, or the program can be run directly
from the floppy disk. The only PC-requirement is a 9 pole serial output
and preferably a mouse.
The program is started from the DOS prompt and will present itself with
the opening screen. (The same window is displayed when selecting the
menu [Info])
Note: The online help screens can be accessed anytime during program
operation by pressing the <F1> key.