User`s manual

Section 1: General Information
8 AXIS AFP IOP User’s Manual
Contents of This
Delivery
The AXIS AFP IOP interface package consists of these parts:
1 x AXIS AFP IOP interface main board (Part no: 0055-3).
An interface which connects to the IBM 3270 environment by Coax
cabling or the IBM 5250 environment by Twinax cabling. The inter-
face contains by default both 3816 and 4028 emulations together with
the Twinax and the Coax software. The interface is delivered with a
factory setting which combines the most important default settings of
the corresponding 3812/3816/4028 IBM printers.
Twinax 1 x Twinax DB9 Twinax T-bar cable AFP IOP (Part no: 14382).
Coax 1 x Coax cable AFP IOP (Part no: 14384).
The Twinax or Coax cable is for connecting to the 9 pole Dsub con-
nector on the AXIS AFP IOP backplate. The interface automatically
detects which patch cable is mounted.
1 x Mounting screw (Part no: 11998).
1 x 3,5" floppy disk (Part no: 14355).
The disk contains a PC-based utility program P11-XXXX for reconfig-
uring the interface through the Serial link cable.
1 x Serial link cable (Part no: 14387).
The cable is for option configuration and software upgrade of the
AXIS AFP IOP through the PC utility program. The Serial link cable
connects to the interface via the same 9 pole connector as the Coax and
Twinax patch cables.
1 x AXIS AFP IOP User’s Manual (Part no: 14363).
1 x A DC/DC converter module, if specifically ordered (Part no: 14409).
Note DC/DC converter required only for the 4039 10 and 12 page printer
models.