Datasheet

AXIS 540/640 User’s Guide Setup for Macintosh

Setup for Macintosh

Note:

Follow the instructions below to choose a printer:

1. Open the Chooser from the Apple menu.

2. Click the LaserWriter, alternatively the LaserWriter 8.0 Icon.

3. If your network has more than one zone, click the name of the default zone. If

your network has no zones, this box does not appear.

4. Click the name of the printer you want to use. The default printer name is shown

as: AXIS<nnnnnn>_<port>, where <nnnnnn> is the last six digits of the

serial number, and <port> is LPT1.

5. For LaserWriter 8.0 printer driver only:

Click Setup..., and then Select Auto Setup. If the printer, as well as the print

server, supports bi-directional printing the installation will be automatically

performed. If not, you will be prompted to select a PPD file matching your

printer. Click OK.

6. Click the Close box. This completes the configuration.

Repeat this procedure for each Macintosh using the AXIS 540+/542+.

Only AXIS 540+ and AXIS 542+ support printing in the Macintosh environment.

Macintosh