Operating instructions
14
Setting the Channel
The motor features a sliding rod mount slot so the motor can be height adjusted
to achieve convenient mesh with the lens. There are 15 and 19mm rod mounts
available. Slide the mount in to the slot, either way up (the clamp can be used
upside down so that the tightening knob is in a convenient place.) It is not
necessary to clamp the rod mount too tightly, nger tight will do. Over tightening
can cause damage to the clamp. Please be aware if the motor swings away from
the lens easily, it may be the entire rod rotating and not the motor clamp slipping.
Check that the rod is not rotating in whatever clamp it is held in before tightening
the motor clamp.
Select the correct drive gear and install onto the motor hub by removing the hub
screw and sitting the gear on over the three locate pins. Replace the screw and
tighten.
Setting the Channel
The Axis1 operates on a secure digital 2.4ghz wireless link. This is not the same as
Wi, Bluetooth or Zigbee (no hopping). There are 12 user denable channels that
can be changed using the CHANNEL button on either the receiver or the
transmitter. The channel changing process is the same on both units.
To verify the current channel on the hand unit, momentarily press the CHANNEL
button. The current frequency is displayed, followed by a signal strength report.
Please see the Checking Signal Strength section of this manual for more
information. The current frequency will show (please note the frequency is
permanently displayed on the receiver). To change the channel, press and hold
the CHANNEL button. After a few seconds, the current channel number will begin
to ash. Pressing the channel button will now incrementally increase the channel
number by one. After channel 12, the number will loop back to 1. Once the
desired channel is selected and is showing on the display, let go of the button and
after a few seconds the new frequency will be selected. A list of channels and
their actual frequencies is listed below.
Channel
1
2
3
4
5
6
7
8
9
10
11
12
Frequency
2.410ghz
2.415ghz
2.420ghz
2.425ghz
2.430ghz
2.435ghz
2.440ghz
2.445ghz
2.450ghz
2.455ghz
2.460ghz
2.465ghz