Operating instructions

The Axis1 consists of three main components; The hand unit, the receiver and

the motor.

Mount the receiver unit on your camera. Using Velcro or Tu Lock is acceptable,

or you can use one of the receiver rod mount accessories available from Hocus

Products. Use the long articulated antenna with the receiver unit. Bend the

antenna up so it is out of the way of the Lemo connectors. Provide power to the

receiver using the supplied power cable. It is advised that power is taken

directly from a battery using a Dtap or similar.

Insert a suitable battery (Canon LP-E6) into the hand unit and switch on using

the PWR button on top of the unit. Use the short antenna with the hand unit.

Powering the receiver unit will switch it on (there is no power

on o switch). The LED display on the unit will ash U.P for

motor unplugged, or no motor present. The display will ash

U.C for uncalibrated if a motor is found.

MOTOR

UNPLUGGED