Datasheet

AXIS Q6035-E PTZ Dome Network Camera

Accessing the Product

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The a dministrator can enable/disable controls for speciﬁed users under

System Options > Security > Users.

With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or

release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Q ueue.

Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the

mouse pointer.

Click the Center mode button and click in the image to center the camera view on that position. The center mode

button could also be used to zoom in on a speciﬁc area. Click in the image and drag to draw a rectangle surrounding

theareatobemagniﬁ ed. To zoom out, rotate the mouse wheel.

Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ c ontrols.

User-deﬁned buttons can also appear in the Control panel. See

Controls, on page 26

Select a recorded tour and click to play a previously recorded tour and click to stop. See

Tour Reco rding, on page 25

Select a PTZ preset position to steer the camera v ie w to the saved position. See

Preset Positions,

on page 22

Click the Start Auto Track button to start autotracking directly from the Live View page. See

Autotracking, on pag e 22

Pan and Tilt bars – Use the arrows t o pan and tilt the camera view, or click on a position on the bar to steer the

camera view to that position.

Zoom bar – U se the arrows to zoom in and out, or click on a position on the bar to zoom to that position.

Focus bar – Use the arrows to focus the camera, or click on a position on the bar to set the focus position. Using the

focus bar will disable the product’s autofocus. To re-enable, use the PT Z control panel wh

ich is opened by clicking

the Ctrl panel button (see above).

Iris bar – C lick on a position o n the iris bar to change the degree to w h ich the iris is opened. This will disable the

product’s auto iris. To re-enable, use the PTZ control panel which is opened by clicking the Ctrl panel button (see above).

The PTZ controls can be dis able d und

er PTZ > Advanced > Controls,see

Controls, on page 26