Datasheet

AXIS Q6032 PTZ Dome Network Camera
Events
Events
Predefined parameters, known as an Event or Event Type, can trigger actions in the Axis product. A common event type is an alarm
that causes the product to upload im ages to an Event Server.
Triggered events - are activated by a signal, for example motion detection.
Scheduled events - run at preset times, in a repeating pattern on selected weekdays.
Actions - refer to what happens when an event occurs .
Triggered events can be activated by:
• Input ports
• Motion detection, see page 33
• Audio detection, see page 35
• A trigger from an uploaded application, see Applications, on page 29
• Pan Tilt Zoom — when the view stops at a preset position
• Full disk — when the SD c ard has le ss than 1 MB free memory left
• Autotracking, see Autotracking, on page 24
• System events, for example on boot.
Event actions include:
• Uploading images to an event server or send images by email
• Savingthevideostreamtotheproduct’sSDcard
• Sending notification message s and emails
• Activating an output port, fo r example, to sound an alarm or lock a door
• Pan Tilt Zoom — go to a preset
• Guard Tour— run Guard Tour
• Autotracking — run Autotracking
• Playing an audio cli p
Event Servers
Event servers receive uploaded image files a nd/or notification messages. To set up event server connections in the Axis product, go
to Events > Event Servers and enter the required information for the server type.
Note
Email servers ar e configured under System Options > Network > SMTP (email).
When the setup is complete, click Test to test the connection (the connection test takes approximately 10 seconds).
30