Datasheet

13
AXIS 210A/211A - Accessing the Camera
Audio controls for AXIS 210A/211A
There are also controls for controlling the client computer’s speaker output and
microphone sensitivity. These controls are only available when audio is enabled, see
Audio Settings, on page 25.
Push-to-talk settings are made in the AMC control panel, see
The AXIS Media Control, on page 16.
The Live View
toolbar displays the following buttons:
The Play/Stop button starts and
stops the live video stream.
The Sn
apshot button saves a snapshot of the video image currently being
displayed. The Snapshot function and
the target directory for saving snapshots
can be configured from the AMC Control Applet in the Windows Control Panel
(Internet Explorer for Windows only).
Click the View Fu
ll Screen button to make the video image fill the entire screen
area. No other windows will be visible. Press Es
c (Escape) on the computer
keyboard to exit full screen.
The record button is used to record the
current video stream. The location where
the image file is saved can be specified using the AMC contro
l panel. To enable
recording, Select Live View Config > Viewer Settings > Enable recording
button.
Click the Sp
eaker and Microphone buttons to switch the sound off and on for
the speaker and microphone, respectively.
Use the sliders to control the volume on the speaker and
microphone. The volume can be set between 0 and
100. The Buffer
slider controls the size of the buffer for audio. A higher level will
reduce audio break-up, but may introduce a noticeable lag in
audio transmission. There are four settings i.e. min, low, high and
max.
When using Half-du
plex mode, this button toggles between allowing you to
speak and listen. The first icon indicate
s that you can talk and the speaker
attached to the camera will play your voice. The second indicates that you will
hear audio from the camera, but no audio will be sent to any web clients.
When in simplex talk mode, the icon toggles
between allowing you to speak and is
dimmed when you do not want other clients to receive any audio.