user manual

AXIS 212 PTZ - Live View Config

Live View Config

Layout

These are the tools for deciding the layout of the

Live View page. The layout can be set in 3 ways:

• Use Axis look - the layout is unchanged.

• Use custom settings - modify the default page

with your own colors, images etc. Click the Con

figure button and see the following page.

• Own Home Page - Upload and use your own cus-

tom page as the default web page. Click the Con-

figure button and see the following page.

Use custom settings

To change the background picture, banner, colors, etc.,

adjust the settings under Modify the Axis look.

To use your own file for e.g. a banner, first upload it

(see the next page) or select External and enter the path

to the file.

Upload Own Web Files

Your own web files, background pictures etc., must first

be uploaded to the AXIS 212 PTZ in order to be

available for selection in the Custom Settings setup

dialog. Once uploaded, the files are shown in the

drop-down list.

1. Enter the path to the file, e.g. a file located on

your workstation or click the Browse button.

2. Select the user level for the uploaded file. Setting the user access level means that you have complete

control over which pages can be viewed by which users.

3. When the path is shown correctly in the text field, click the Upload button.

All uploaded files are shown in the list in the lower section of the page. To remove a file, check the box provided

next to it and then click the Remove button.

• To use your uploaded file, click the radio button and select the file from the drop-down list by Own:

• To use an external file located somewhere other than in the AXIS 212 PTZ, click the radio button and enter

the URL by External.

Note: Unchecking the box for Show setup link removes the link from the camera’s web pages. The setup tools will then only be accessible by

entering the full setup address into the address/URL field of a browser, i.e. http://<ip address>/operator/basic.shtml