Printer User Manual

Section 5: Setup for OS/2
40 Axis NPS 530/532 User’s Manual
Install the NPS 530/532
Once the Axis Print Utility is installed and running, you can install the
NPS 530/532 by clicking the Install entry on the action bar. The Install
command initiates a search for Axis print servers on the network. Your
new NPS 530/532 will appear in the list (together with any other Axis
print servers) as a printer port:
The digits following AX are the six last digits of the NPS 530/532 serial
number (110086 in this example). LP1 is the NPS 530/532 printer port
(LPT1).
The Axis print server ports appearing in the list can now be assigned as
print queue destinations as described below.
Note: If the serial number of your NPS 530/532 is 00408C110086
, then the
default port name is AX110086
.LP1. The serial number is found on the
label at the back of the NPS 530/532. You may change the default names
by editing parameters LPRINT_1, LPRINT_2, etc. in the config file as
described in Appendix A. If you want to change the default port names,
you must do that before installing the NPS 530/532 using Axis Print
Utility.
AX110086.LP1