User Guide

27
AXIS 209FD/FD-R/FD-R M12
Services
Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which
associates the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled to
prevent unintentional resetting of the IP address.
Notes:
• The ARP/Ping service is automatically disabled 2 minutes after the unit is started, or as soon as an IP address is set.
• Pinging the unit will still be possible when this service is disabled.
Options for notification of IP address change - If the IP address for the camera changes, automatically by
DHCP for example, you can choose to be notified of the change. Click Settings... and enter the required
information.
AXIS Internet Dynamic DNS Service - Use
the AXIS Internet Dynamic DNS service to assign a host name
for easy access to your AXIS 209FD/FD-R/FD-R M12 (requires Internet access).
Click Settings...
to register the camera with the Axis Internet Dynamic DNS service, or to modify the
existing settings (requires access to the Internet). The domain name currently registered at the Axis Internet
Dynamic DNS service for your product can at any time be removed.
For more information, please refer to the
online help .
Advanced TCP/IP Settings
DNS Configuration
DNS (Domain Name System) provides the translation
of host names to IP addresses on your network.
Obtain DNS server address via DHCP - automati
cally use the DNS server settings provided by the DHCP
server. Click the View button to see the current settings.
Use the following DNS server address
- enter the desired DNS server by specifying the following:
Domain name
- enter the domain(s) to search for the host name used by the AXIS 209FD/FD-R/FD-R M12.
Multiple domains can be separated by semicolons (;). The host name is always the first part of a Fully
Qualified Domain Name, e.g. myserver is the host name in the Fully Qualified Domain Name
myserver.mycompany.com where mycompany.com is the Domain name.
Primary and Secondary DNS servers - en
ter the IP addresses of the primary and secondary DNS servers.
NTP Configuration
Obtain NTP server address via DHCP - check this radio button to automatically look up and
use the NTP
server settings as provided by DHCP. Click the View button to see the current settings.
Use the following NTP server address - to make manual settings, check this radio button option and enter
the host name
or IP address of the NTP server in the Network address field.
Host Name Configuration
The AXIS 209FD/FD-R/FD-R M12 can be accessed using
a host name, instead of an IP address. The host
name is usually the same as the assigned DNS Name.
For more information, please see Secur
ity.
Link-Local IPv4 Address
This is enabled by default and assigns the AXIS 209FD/FD-R/FD-R M12 an
additional IP address for use
with UPnP
™. The camera can have both a Link-Local IP and a static/DHCP-supplied IP address at the same
time - these will not affect each other.