User Guide

NetWare
UNIX
Windows
OS/2
Macintosh
AXIS 5600 User’s Manual Section 9: Management & Configuration
99
Using a Web browser
Once you have established the AXIS 5600 in the TCP/IP
environment, as described in Assigning an IP address on page 25, you
are free to access the AXIS 5600 Web pages from any Java enabled
Web browser.
The Web interface of the AXIS 5600 is divided into two modes of
operation, User mode and Admin mode.
User In User mode, you have no rights to change any parameter settings.
However, if you have access rights to the Admin mode, you can
change some of the basic parameters from User mode via the
Configuration Wizard. This mode is intended for regular users who
are only interested in using the print server's interface for checking
print jobs or viewing printer properties. If you want to change any
other of the print server's settings, you must enter the Admin mode.
Admin When in Admin mode, you have access to all the print server's
parameters and you can change them to your liking. This mode is
intended for network administrators and is password protected to
prevent unauthorized changing of the print server parameters.
Note: ❏ If the ROOT_PWD parameter is set to pass, which is the default
value, you have access to the User mode as well as the Admin
mode.
Accessing the
Web Pages
Follow the steps below to access the internal home page of the AXIS
5600. The browser used in the following example is Netscape
Navigator 4.3.
1. Start your Web browser.
2. From the File menu, select Open Page...