User Guide

NetWare

AXIS 5400 User’s Manual Section 4: Setting Up - NetWare

Basic Queue-based printing (Pure IP)

Axis print servers with software version 6.0 or later allow users to print

in a Pure IP environment using traditional queue-based printing. If

you prefer using NDPS as your printing method, please refer to Setup

using NDPS, on page 35.

In the NetWare Pure IP environment, you must use NetWare

Administrator to create the printer, print server and queue objects.

Installing the

AXIS 5400

Follow the instructions below to install the AXIS 5400 in the NetWare

Pure IP environment:

1. Start the Configuration Wizard from the User mode in the AXIS

5400 Web interface.

2. Click your way through the Wizard until reaching the NetWare

page. Make sure that the PSERVER_NDS parameter is set. If you

want to change the parameter value or if the parameter value is

empty, enter the desired values. The parameter value must include

the tree or the preferred file server you want to login to and the

print server name including the context. The syntax of the

PSERVER_NDS parameter is described in PSERVER_NDS

parameter, on page 42.

3. Use NetWare Administrator to create and link the printer, print

server and queue objects in the NDS tree.

4. Use the Add Printer Wizard to install the printer on your client.

Note that only NDS queue based PSERVER printing is

supported.

Any configuration and management of the AXIS 5400 can be

performed from any standard Web browser. Please refer to Using a Web

browser, on page 98.

In Pure IP environments, the AXIS 5400 supports NDS queue based

PSERVER printing or NDPS printing. Refer to Queue-based Printing

Methods, on page 43 alternatively Setup using NDPS, on page 35.