User Guide

NetWare

Section 4: Setting Up - NetWare AXIS 5400 User’s Manual

Installing the AXIS 5400 in NDPS environments

Having assigned an IP address to the AXIS 5400 as described in

Assigning an IP address, on page 25, you are now ready to install the

AXIS 5400 for NDPS printing. You can select to install the connected

printers as public or controlled access printers. Follow the instructions

below to install the AXIS 5400 using NDPS:

Notes: ❏ The

HP-JETADMIN parameter of the AXIS 5400 must be set to

YES in order for the communication between the AXIS 5400 and

the NDPS gateway to be enabled.

❏ If you do not have an NDPS Manager object available, start out

with creating one in the NetWare Administrator.

Public Access To create a public access printer using the NDPS Manager object in

your NetWare administrator, do the following:

1. Double-click on the NDPS Manager object you will be using to

control the Printer Agents.

2. At the Identification page for the NDPS Manager, click the

printer Agent List button. The Printer Agent List dialog will

appear.

3. Click New. The Create Printer Agent dialog will appear.

4. Type a name of your choice in the NDPS Printer Agent field.

5. Choose the Axis Gateway configuration in the Gateway Type

window. Select TCP/IP or IPX as transport protocol. (See Note

below).

6. Click OK.

7. Once you have completed the required tasks, you are ready to

print in your NDPS environment.

Notes: ❏ The Public Access print servers are immediately available for

everyone on the network.