User's Manual

AXIS P5522 PTZ Dome Network Camera

Events

Audio d etection

The Axis p roduct can be conﬁgured to generate an alarm when audio rises above, falls below or passes the audio alarm level.The

alarm level can be set in the range 0–100 where 0 is the most sensitive and 100 the least sensitive.

1. Go to Events > Audio Detection.

2. Set the audio alarm level and click Save.

3. Go to Events > Even t Types andsetupatriggeredevent,seeSet up a triggered event, on p age 29.

Note

A multi-connector cable (available from Axis) is required when connecting external audio equipment to the Axis product.

See Multi-Connector Cable (sold separately), on page 47.

Port Status

The list on the Events > Port Status page shows the status of the product’s inp ut and output ports. Inputs and outputs are conﬁgured

from the System Options > Ports & Devices page which requires administrator rights.

Note

A multi-connector cable (available from Axis) is required when connecting I/O devices to the Axis product. See

Multi-Connector Cable (sold sep arately), on page 47.