INSTALLATION GUIDE AXIS M1025 Network Camera
About this Document This manual is intended for administrators and users of the AXIS M1025 Fixed Dome Network Camera, and is applicable to firmware 5.4 and later. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems may also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis website, as required.
Electromagnetic Compatibility (EMC), on page 3. • Low Voltage (LVD) Directive 2006/ 95/EC. See Safety, on page 4. • Restrictions of Hazardous Substances (RoHS) Directive 2011/65/ EU. See Disposal and Recycling, on page 4. A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact Information, on page 5.
Japan - B Safety This product complies with IEC/EN/UL 60950-1, Safety of Information Technology Equipment. The power supply used with this product shall fulfill the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS) according to IEC/EN/UL 60950-1. The POE (Ethernet) cable should not be routed to an outside power source unless protectively earthed.
about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly. This product complies with the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). channels according to your AVHS license agreement to ensure a rapid response.
could cause damage to the product. • Only use applicable tools when installing the Axis product; excessive force could cause damage to the product. • Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning. • Use only accessories that comply with technical specification of the product. These can be provided by Axis or a third party. • Use only spare parts provided by or recommended by Axis.
selbst zu reparieren. Wenden Sie sich bei Service- Angelegenheiten an Axis oder an Ihren Axis-Händler. Verwenden Sie dieses Axis-Produkt unter Beachtung der vor Ort geltenden rechtlichen Bestimmungen. • Conservare il prodotto Axis in un ambiente asciutto e ben ventilato. • Evitare di esporre il prodotto Axis alle vibrazioni, agli urti o a forte pressione. Non installare il prodotto su staffe instabili, superfici o pareti instabili o vibranti, poiché ciò potrebbe danneggiare il prodotto.
Dispose of used batteries according to the manufacturer's instructions. Jetez les piles usagées conformément aux consignes du fabricant. Verbrauchte Batterien sind gemäß den Herstelleranweisungen zu entsorgen. Smaltire le batterie usate secondo le istruzioni del produttore.
AXIS M1025 1x Page 9 1x 1x 1x 1x Camera owner authentication key The authentication key on this label is used to authenticate the owner/administrator of this Axis camera. The key is associated with the camera’s uniqu e serial number (S/N), as shown at the top of the label. The authentication key is used for registering the camera with an AVHS service provider for hosted video. For more information and help to find a local AVHS Service Provider, go to: http://www.axis.
Page 10 AXIS M1025 www.axis.
AXIS M1025 1 PoE IEEE 802.3af/802.3at Type 1 Class1 Max 3.
Page 12 AXIS M1025 2 720p (HDMI) @ 30/25 fps
AXIS M1025 Page 13 17 3 4
Page 14 5 6 AXIS M1025
AXIS M1025 7 Page 15
Page 16 8 AXIS M1025
AXIS M1025 9 Page 17
Installation Guide AXIS M1025 Network Camera © Axis Communications AB, 2014 Ver.1.3 Printed: May 2014 Part No.
