User's Manual

AXIS P1343-E Network Camera
Hardware overview
LED indicators
LED
Color
Indication
Green
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Amber
Steady for connection to a 10 MBit/s network. Flashes for network a ctivity.
Network
Unlit No network connection.
Green Steady g reen for normal operation.
Amber
Steady during startup and when restoring settings.
Status
Red
Slow flash for failed upgrade.
Green
Normal oper ation.
Power
Amber
Flashes green/amber during firmware upgrade.
LED
Color
Indication
Green
Normal oper ation.
Housing
(fan and
heater)
Flashing
green
Single flash: Heater error
Double flash: Fan error
Triple flash: General error
Alarm events will be triggered through the camera’s input port.
See the User Manual, available on the CD provided with this product, or from www.axis.com
Contact your Axis reseller for information about spare parts and troubleshooting.
Note
• The Status LED can be configured to be unlit d u ring normal operation. To configure, go to Setup > System Options >
Ports & Devices > LED. See the online he lp for more information.
• The Status LED can be configured to flash while an event is a ctive.
• The Status LED can be configured to fl ash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
Status LED when using Focus Assistant
Status Color
Indication
Green
Focus Assistant is enabled
The lens is optimally adjusted
Amber The camera has been moved, or an object has been inse rted in front of the lens. Exit and
restart the Focus Assistant.
Thelensislessop
timally adjusted
Red The camera has been moved, or an object has been inserte d in front of the lens. Exit and
restart the Focus Assistant.
The lens is poorly adjusted
Replacing the lens
It is possible to use optional lenses for the Axis product.
To replace the lens:
1. Disconnect the iris cable.
2. Unscrew the standard lens.
9