User's Manual Fixed Dome Network Camera AXIS 225FD

33
AXIS 225FD - Event Configuration
Please see the online help for descriptions of each available option.
High level Only very large objects
trigger motion detection
An object that appears in the region will
trigger the motion detection for a long
period
Ordinary colored objects on ordinary
backgrounds will trigger the motion
detection
Low level Even very small objects
t
rigger motion detection
An object that appears in the region will
trigger motion detection for only a very
short period
Only very bright objects on a dark back-
ground will trigger motion detection
Default value Low Medium to High Medium to High
Examples:
• Avoid triggering on small objects in the image by selecting a high object size level.
• To trigger motion detection as long as there is activity in the area, select a high history level.
• To only detect flashing light, low sensitivity can be selected. In other cases, a high level is recommended.
Port Status
Under Event Configuration > Port Status there is a list showing the status for the camera’s
input and output. This is for the benefit of Operators, who cannot access the System
Options section.
Example:
If the Normal state for a door push button connected to an input is set to Open circuit - as long as the
button is not pushed, the state will be inactive. If the doorbell button is pushed, the state of the input
changes to active.
Object Size
History Sensitivity