User Guide

Section 4: Setting Up - Windows
54 AXIS 540/640 User’s Manual
Client-Server Printing:
Client Setup
To print in client-server mode from within a Windows NT
environment, it is necessary to setup the server on a Windows for
Workgroups workstation. Refer to Client-Server Printing: Server Setup,
on page 49.
Follow these steps to use your AXIS 540/640 for client-server printing
at a Windows NT client:
1. Open Print Manager.
2. In the Printer menu, select Connect to Printer...
3. In the Shared Printers list, select the printer you want to use. Click
OK.
The client setup is completed and you can now print through your
AXIS 540/640.
Windows NT - LPD Printing
This section describes how to set up a Windows NT Server (ver. 3.5 or
later) for LPD printing over the TCP/IP protocol.
If you have not already done so, you should perform the TCP/IP basic
setup procedures prior to installing a printer for LPD printing. These
procedures are defined in Basic Set Up for TCP/IP, on page 25.