Network Video Recorder Installation Guide

Page 8 AXIS 262+ Installation Guide
Accessing the AXIS 262+ from the Internet
Once installed, your AXIS 262+ is accessible on your local network (LAN). To access the
Video Recorder from the Internet, network routers must be configured to allow incoming
traffic, which is usually done on a specific port. Refer to the documentation for your router
for further instructions. For more information on this and other topics, visit the Axis
Support Web at www.axis.com/techsup
If you are experiencing problems accessing the AXIS 262+ from the Internet refer to the
NAT traversal section of the AXIS 262+ User’s manual