User Guide

AXIS 243Q Blade - I/O Terminal connector

RS-485 COM port

The RS-485 COM Port supports several operational modes:

• Generic

TCP/IP - enables the video server to receive status/data and send com-

mands via TCP/IP

• Generic

HTTP - enables the video server to receive status/data and send com-

mands via HTTP

• P

an Tilt Zoom (PTZ) - for controlling a PTZ device. A PTZ device requires a driver

for its function. Drivers can be obtained from www.axis.com. Please see page 25

for information on how to connect PTZ devices.

While the RS-485 can be used to connect a PTZ dev

ice, it is necessary that the device’s

protocol supports ‘daisy chaining’ in order to connect and control more than one camera

(up to four).

Chaining the units allows them to share a single

serial port. The protocol then decides

which unit to address and sends commands to it specifically. The diagram below explains

how the devices are connected.

RS-485