User Guide
Table Of Contents
- An Introduction to the AXIS 2420
- Physical Description
- Checking The Hardware Inventory
- Installing on a Network
- Installing via a Modem
- Focusing Your Camera
- Configuring Your Camera
- The Factory Default Settings
- Choosing Your Application
- The AXIS 2191 Audio Module
- Appendix A - Troubleshooting
- Appendix B - Other IP Setup Methods
- Appendix C - Lenses and Advanced Focusing
- Appendix D - Customizing Your Camera
- Appendix E - Updating the Firmware
- Appendix F - The Unit Connectors
- Appendix G - High-Speed Services
- Appendix H - Technical Specifications
- Physische Beschreibung
- Überprüfen des Lieferumfangs
- Installieren in einem Netzwerk
- Anschließen an ein Modem
- Scharfeinstellung der Kamera
- Werkseitige Standardeinstellungen
- Description du Materiel
- Vérification de la liste du matériel
- Installation sur un réseau
- Installation par l’intermédiaire d’un modem
- Mise au point de votre caméra
- Restauration des paramètres d’usine par défaut
- Descripción física
- Comprobar el inventario de hardware
- Instalación de la cámara a una red
- Instalación de la cámara a un módem
- Enfocando la cámara
- Incluir los parámetros por defecto
- Index
AXIS 2420 User’s Manual Choosing Your Application
37
Viewing live Images in a Browser
This application represents the most basic application using a network camera. It is ideally
suited for occasionally-visited sites on both large corporate networks, and SOHO
(Small-Office Home-Office) applications, where a small network is installed and
maintained. If you anticipate a large audience for your images, you should consider
configuring your product to upload images to an FTP server/ISP, as described in
Sequentially Uploading Images to an FTP Server/ISP, on page 35.
Simply install the AXIS 2420 directly onto your local Ethernet network and then run the
Installation Wizard to immediately view live video images in your browser. The Wizard
helps you define the image format, network and security settings.
Installation and Configuration Overview
Configure your AXIS 2420 for viewing images over a network as follows:
1. Connect the AXIS 2420 to your local network. Refer to Installing on a Network, on page 12.
2. Open the Home Page in your browser and start the Installation Wizard. Complete the Wizard to establish the basic settings
for your camera - selecting Network as your chosen method of connection in the Modem or Network dialog. Refer to
Configuring Your Camera, on page 18.
3. Your application is now complete. Having completed the Wizard, you should now check the installation by checking that you
have full access to both the images and the Web pages in your browser.
AXIS 2420
LAN/WAN
Intranet or Internet
Browser
Browser