User Guide
Table Of Contents
- An Introduction to the AXIS 2420
- Physical Description
- Checking The Hardware Inventory
- Installing on a Network
- Installing via a Modem
- Focusing Your Camera
- Configuring Your Camera
- The Factory Default Settings
- Choosing Your Application
- The AXIS 2191 Audio Module
- Appendix A - Troubleshooting
- Appendix B - Other IP Setup Methods
- Appendix C - Lenses and Advanced Focusing
- Appendix D - Customizing Your Camera
- Appendix E - Updating the Firmware
- Appendix F - The Unit Connectors
- Appendix G - High-Speed Services
- Appendix H - Technical Specifications
- Physische Beschreibung
- Überprüfen des Lieferumfangs
- Installieren in einem Netzwerk
- Anschließen an ein Modem
- Scharfeinstellung der Kamera
- Werkseitige Standardeinstellungen
- Description du Materiel
- Vérification de la liste du matériel
- Installation sur un réseau
- Installation par l’intermédiaire d’un modem
- Mise au point de votre caméra
- Restauration des paramètres d’usine par défaut
- Descripción física
- Comprobar el inventario de hardware
- Instalación de la cámara a una red
- Instalación de la cámara a un módem
- Enfocando la cámara
- Incluir los parámetros por defecto
- Index
Configuring Your Camera AXIS 2420 User’s Manual
20
The Administration Tools
Whether you are viewing images directly over the network, or transmitting images over a
modem, you can use the Web-based Administration Tools for configuring and managing
your AXIS 2420 at any time. After initially setting up the AXIS 2420 with the Installation
Wizard, these tools are ideal for more advanced users.
Accessing the Tools
Follow the instructions below to access the Administration Tools using a browser:
1. Start the browser and enter the name or IP address of the AXIS 2420 (or any DNS
name if you are accessing the unit via the Null Modem Cable) in the location/address
field.
Example!
2. The AXIS 2420 Home page is now displayed. Click Administration Tools.
http://172.21.1.200/