User Guide
Table Of Contents
- An Introduction to the AXIS 2420
- Physical Description
- Checking The Hardware Inventory
- Installing on a Network
- Installing via a Modem
- Focusing Your Camera
- Configuring Your Camera
- The Factory Default Settings
- Choosing Your Application
- The AXIS 2191 Audio Module
- Appendix A - Troubleshooting
- Appendix B - Other IP Setup Methods
- Appendix C - Lenses and Advanced Focusing
- Appendix D - Customizing Your Camera
- Appendix E - Updating the Firmware
- Appendix F - The Unit Connectors
- Appendix G - High-Speed Services
- Appendix H - Technical Specifications
- Physische Beschreibung
- Überprüfen des Lieferumfangs
- Installieren in einem Netzwerk
- Anschließen an ein Modem
- Scharfeinstellung der Kamera
- Werkseitige Standardeinstellungen
- Description du Materiel
- Vérification de la liste du matériel
- Installation sur un réseau
- Installation par l’intermédiaire d’un modem
- Mise au point de votre caméra
- Restauration des paramètres d’usine par défaut
- Descripción física
- Comprobar el inventario de hardware
- Instalación de la cámara a una red
- Instalación de la cámara a un módem
- Enfocando la cámara
- Incluir los parámetros por defecto
- Index
AXIS 2420 User’s Manual Configuring Your Camera
19
The Installation Wizard
The Installation Wizard provides a quick and easy way of defining the basic settings for
your installation - as explained in the Administration Tools Overview, on page 21.
Using the Installation Wizard
1. Start the Installation Wizard from the product’s Home Page or from the
administration tools page.
2. Click Start>. Follow the instructions to complete the configuration.
3. Click the Finish button to save the settings to the camera.
The Application Wizard
The Application Wizard is started from the main Administration Tools page. It provides a
quick and easy way of making your application settings - as defined in the Administration
Tools Overview, on page 21.
Using the Application Wizard
1. Start the Wizard from the Administration Tool Page.
2. Click Start>. Follow the instructions and reply to the questions asked by the wizard.
3. Click the Finish button to save the settings to the camera.