Security Camera User Manual

UNIX
Type the following commands:
Example:
arp -s 192.168.3.191 00:40:8c:10:00:86 temp
ping 192.168.3.191
7. Access the AXIS 240 by entering the Internet address (URL) into
the location field of your Web browser.
Example:
http://192.168.3.191/
8. Adjust the focus of the cameras. Reload your Web browser to test
your adjustments.
The installation is complete and you can now include pictures taken
by the cameras into your own applications.
Taking Snapshots
To trigger a camera snapshot, simply enter the URL of your AXIS
240 into the location field of your Web browser.
These snapshot types are available within the AXIS 240:
To integrate live snapshot images into your own applications and
web pages, refer to the URL of the AXIS 240 as detailed below:
Example:
http://192.168.3.191/fullsize.jpg?camera=1
Example: ( Adding an HTML reference)
<IMG SRC=”http://192.168.3.191/fullsize.jpg?camera=2”
ALT=”A fullsize JPEG Image from Camera 2”>
Note:
arp -s <Internet address> <Ethernet address> temp
ping <Internet address>
File name Description
fullsize.jpg Full size JPEG snapshot. Generation time = 0.5 sec
halfsize.jpg Half size JPEG snapshot. Generation time = 0.3 sec
lastshot.jpg The last snapshot taken by the camera, either “full
size” or “half size”.
hugesize.jpg The highest resolution snapshot available. As
opposed to the ‘fullsize’ and ‘halfsize’ images, this
type of snapshot is software generated. Generation
time = 18 sec
zoom.jpg Derived from the from the center of ‘hugesize’.
Generation time = 8 sec
To specify the camera source, you must add the CGI parameter
?camera=<n>
to your URL request. If omitted, the default
camera will be used.