- Axis User's Manual Network Camera 2120

AXIS 2120 User’s Manual Configuring Your Camera
25
System Security
To prevent any unauthorized use of the camera, the AXIS 2120 supports multi-user
password protection and access is restricted to defined users only. The system
Administrator(s) has exclusive access to the product’s Administration Tools and can
determine the registration and access rights for all users.
Notes: •When accessing the Administrator Tools for the first time, you will be assumed to be the admin-
istrator and will be logged in as such, with the username root and default password pass.
•The root password must, however, be changed as soon as possible. Until this has been done, the
security features in the product be will not
be enabled. Furthermore, all Axis products are
shipped with the same password by default. Close and restart your browser to complete the
operation.
User Access Rights
As an Administrator, click System - Users to perform any of the following tasks:
• define or edit the administrator (root) password
• define, add and delete user names and passwords
• assign individual access rights for selected users, where each user is awarded one or all of the
following levels of access:
- Admin: a user granted with Admin rights has exclusive access to the product Administration
Tools and can consequently determine the registration of all users.
- Dial-in: provides the user with dial-in modem access only to the AXIS 2120.
- View: provides the lowest level of access, which allows the user to view the images only.
Specifying at least one such user will disallow all other anonymous access.
Important!
By default, the AXIS 2120 supports anonymous user access, which means that anybody on the Inter-
net/intranet has access to the video images from a browser.
To restrict open access, simply register a single authorized user. This effectively disables the anonymous
user service and restricts camera access to specified users. If the anonymous user service is satisfactory
for your application, simply do not add any users. The Administrator’s own settings are enough to pro-
vide anonymous viewing access.