- Axis User's Manual Network Camera 2120

AXIS 2120 User’s Manual Installing Your Camera to a Modem

Refining the Dial-up Networking Properties

Having created the dial-up connection for your AXIS 2120, follow the steps below to

refine the connection properties:

❷Click the Server Types tab. From the

drop-down list, select PPP as the Type

of Dial-Up Server.

❶ From the dial-up networking dialog, right-click the

dedicated dial-up connection previously created for your

camera (AxisCamera was the connection used in this and

previous examples). Select Properties.

❸In the Advanced options field, check

Enable software compression. All other

checkboxes should remain unchecked.

❹In the Allowed network protocols field,

check the TCP/IP checkbox. The NetBEUI and

IPX/SPX checkboxes should remain unchecked.

❻Check the Use IP header compres-

sion and Use default gateway on a

remote network checkboxes. Click OK.

❼Click the Scripting tag and ensure that the Start ter-

minal screen minimized checkbox is checked. Click OK

to exit Dial-Up Networking Properties.

❺Click TCP/IP settings and then check the

Server assigned IP address, and Server

assigned name server addresses radio buttons.