- Axis User's Manual Network Camera 2120

Installing Your Camera to a Modem AXIS 2120 User’s Manual

Creating a Dial-up Networking Connection

Follow the steps below to create a dial-up networking connection to your AXIS 2120:

❶Double-click My Computer and

then double-click the Dial-Up

Networking icon.

❷Double-click the Make New

Connection icon.

❹From the drop down dialog,

select the Standard Modem pre-

viously created for the AXIS

2120 as the selected device.

Click Configure...

❺To significantly

improve the performance

of your AXIS 2120 when

using the Null Modem

cable, set the Maximum

Speed to 115200.

❽You have now successfully created your

dedicated dial-up networking connection

for your AXIS 2120. Click Finish.

❼The telephone numbers requested in the

following dialog are not required for use in

the logical connection to your camera. To

bypass the wizard error correction, simply

enter any dummy number into the Area

code, Telephone number and Country code

fields. Click Next>.

❻Click OK and then click

Next>.

The new dial-up network con-

nection is displayed. You are

now ready to refine the dial-up

networking properties, as

described in the next section...

❸Provide the connection with a

name (AxisCamera is the name

used in the subsequent examples).