- Axis User's Manual Network Camera 2120

AXIS 2120 User’s Manual Installing Your Camera on a Network
13
You will now see ‘Request timed out...’ messages repeatedly returned in the window.
Notes: •In Windows you can find out the IP address of your workstation by running winipcfg (Win
95/98/ME) or
ipconfig (Win NT/2000) from the command line.
•See also Other IP Setup Methods, on page 59.
❸ Connect an Ethernet cable to your AXIS 2120
and attach it to the network.
Power Indicator
Network Indicator
❻ Exit ping. The installation is complete, and you are now ready to
access the AXIS 2120 from your Web browser, as described in the
next section.
❺ Approximately 10-15 seconds after connecting the power sup-
ply, the message ‘Reply from 172.21.1.200...’ - or
similar, is returned in the Command Prompt. Ensure that the
Power Indicator is permanently lit and that the Network Indicator
flashes intermittently.
❹ Attach the external Power Supply to
the unit and connect it to your local
mains supply.