- Axis User's Manual Network Camera 207/207W

28
AXIS 207/207W - System Options
System Options
Security
User access control is enabled by default. An administrator can set up other users, by
giving these user names and passwords. It is also possible to allow anonymous viewer
login, which means that anybody may access the Live View page, as described below:
Users - the user list displays the authorized users and user groups (levels):
Provides the lowest level of access, which only allows access to the Live View page.
An Operator can view the Live View page, create and modify events and adjust certain other
settings. Operators have no access to the System Options.
An administrator has unrestricted access to the Setup Tools and can determine the registration of
all other users.
User Settings - check the relevant checkboxes to enable:
• Anonymous viewer login - allows any viewer direct access to the Live View
page.
• Maximum number of simultaneous viewers - enter a value here to restrict the
number of Motion JPEG and MPEG-4 viewers accessing the unit. This is useful if
you need to save on bandwidth. Note that within the limit of 10 viewers,
all mul-
ticast viewers count as 1 viewer.
Date & Time
Current Server Time - displays the current date and time (24h clock). The time can be
displayed in 12h clock format in the Overlay (see below).
New Server Time - Select your time zone from the drop-down list. If you want the server
clock to automatically adjust for daylight savings time, select the Automatically adjust for
daylight saving time changes.
From the Time Mode section, select the preferred method to use for setting the time:
• Synchronize with computer time - sets the time from the clock on your
computer.
• Synchronize with NTP Server - the camera will obtain the time from an NTP
server every 60 minutes.
• Set manually - this option allows you to manually set the time and date.
Note:
• If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.
See Network > TCP/IP below.
Date & Time Format Used in Images - specify the formats for the date and time (12h or
24h) displayed in the video streams.
Viewer
Operator
Administrator