- Axis User's Manual Network Camera 207/207W

11
AXIS 207/207W - Accessing the Camera
Focusing
Status Indicator
Focus Ring
To focus:
Open a browser and
examine the image. If
required, adjust the focus
ring until the focus is
satisfactory.
Small dot above the lens
assembly.
Note: Upon delivery, the raised line on the focus ring is aligned with the dot above the lens, and the focus is
set to infinity.
(outer ring)
(inner ring)
Raised line
on focus ring.
The Live View Page
Depending on whether or not the Live View page has been customized, the buttons
described below may or may not be visible.
To resize the video image, click the View Size buttons: half-size (x
1
/2),
full-size (x1), x2 or x4. Note that this does not change the video
image’s resolution, but simply how it is displayed.
The Video Format drop-down list allows the video format on the Live
View page to be temporarily changed.
The Output buttons control the
output directly from the Live
View page. These buttons are
configured under Setup > Live
View Config > Layout.
Pulse - click this button to activate the
output for a defined period of time, e.g.
to switch on a light for 20 seconds.
Active/Inactive - click these buttons to
manually start and stop a connected
device, e.g. switch a light on/off.