User's Manual

AXISM5525-EPTZNetworkCamera

Setup

6.Typeanamefortheactionrule.

7.Fromthelistoftriggers,selectApplicationsandthenselectAXISVideoMotionDetection(VMD).

8.Fromthelistofactions,selectPTZControlandthenselectPresetPosition.

9.Selectthepresetpositionyouwantthecameratogoto.

10.ClickOk.

HowtorecordvideowhenaPIRdetectorsensesmotion

ThisexampleexplainshowtoconnectanAxisPIRdetectortothecamera,andsetupthecameratostartrecordingwhenthe

detectorsensesmotion.

Requiredhardware

•3–wirecable(ground,power,I/O)

•AxisPIRdetector

NO NO

TICE TICE

TICE

Disconnectthecamerafrompowerbeforeconnectingthewires.Reconnecttopowerafterallconnectionsaredone.

Connectthewirestothecamera’sI/Oconnector

Note

ForinformationontheI/Oconnector,seeConnectorsonpage19

1.Connectthegroundwiretopin1(GND/-).

2.Connectthepowerwiretopin2(12VDCoutput).

3.ConnecttheI/Owiretopin3(I/Oinput).

ConnectthewirestothePIRdetector’sI/Oconnector

1.Connecttheotherendofthegroundwiretopin1(GND/-).

2.Connecttheotherendofthepowerwiretopin2(DCinput/+).

3.ConnecttheotherendoftheI/Owiretopin3(I/Ooutput).

ConguretheI/Oportinthecamera’swebpage

1.GotoSettings>System>I/Oports.

2.SelectInputinthePort1drop-downlist.

3.Givetheinputmoduleadescriptivename.

4.TomakethePIRdetectorsendasignaltothecamerawhenitsensesmotion,selectClosedcircuitinthedrop-downlist.