User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
Appendix F: The RS232 Serial Ports AXIS 240 Users Manual
98
The help menu is displayed:
Access rights
The commands available to each user from within the welcome menu
will depend upon their user privileges.
Abbreviations
All non-destructive commands can be abbreviated to shortest
unambiguous form. However, because of their severity, the
HardReset and SoftReset commands must be entered in the
entirety.
Super-user
The
Su[username
] command is used to become another user, e.g. Su
root
will, if you supply the correct password when prompted for it,
give you root access and enable use of the
Reset
and
SetDate
commands.
Help Display help text
Date Get current date and time
SetDate Set current date and time
Version Print current software
version
Su Become super-user or another
user
Login Become a specific user
Sz Send a file using zmodem
protocol
SoftReset Protocol reinit
HardReset Complete reboot
Exit Disconnect
Ip Print current IP address
Ppp Initiate PPP connection
Exit Disconnect
Quit Disconnect
Goodbye Disconnect