User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
AXIS 240 Users Manual Appendix D: Technical Specifications
85
Pan/Tilt Devices
One Pan/Tilt device, or several if they are daisy chained, can be
controlled via an RS232 or RS485 serial interface. The Canon VC-
C3, Sony EVI-D30/D31, Sony EVI-G20/G21, Ernitec ICU,
Videmech and Pelco Digital Coaxitron have direct support.
Operating
Temperature
40-125°F (5-50°C).
Humidity
20-80% RHG, non-condensing.
Approvals
EMC: FCC Class A, CE:EN 55022/1987,EN50082- 1/1992
Safety: EN 60950, UL, CSA.
Size
Height: 1.5 in (4.0 cm)
Length: 5.7 in (14.5 cm)
Width: 7.7 in (19.5 cm)
Weight
1.0 lb. (0.5 kg), excluding power supply.
Power Supply
12V AC, 9.6 VA, via external power supply (PS-D).
Alternative power input on PS-D connector:
11 - 18V DC, min 600 mA
10 - 15 V AC, min 7 VA
Does not use the same GND as the video inputs, chassis, etc.
Alternative power input on ALT. POWER connector:
4.9 - 5.2V DC, min 1A
Use a PC-standard power supply, pin 4 =+5V, pin 2 and pin 3 =
GND. Uses the same GND as the video inputs, chassis, etc.
All specifications are subject to change without prior notice.