User Manual

Appendix B: The Parameter List AXIS 240 Users Manual
76
--- Camera specific
parameters
LOGO_X. = 10
Axis logo position in pixels, the horizontal coordinate.
LOGO_Y. = 10
Axis logo position in pixels, the vertical coordinate.
LOGO_SHOWN. = NO
Enables Axis logo display.
CLOCK_X. = 1
Clock position in pixels,, the horizontal coordinate.
CLOCK_Y. = 1
Clock position in pixels, the vertical coordinate.
CLOCK_SHOWN. = NO
Enables clock display.
CLOCK_MODE. = AM/PM
AM/PM or 24 hours time format.
Image appearance
parameters
LIGHT_FRONT_LED. = YES
Enables the Active indicator.
CACHE_TIME. = 0
Determines maximum cache period for snapshots,
e.g the same snapshot will be displayed for all requests within a 3
seconds period.
System Parameters
MODEM_TYPE. =
Autodetect Modem or Null Modem.
SERIAL_MODE. = DISABLED
Enables serial mode for PPP or Zmodem access when set to
FULL_SUPPORT, INBOUND_ONLY or OUTBOUND_ONLY.
SERIAL_BAUD. = 9600
Baud rate.
SERIAL_FLOW. =
Modem server operation mode. Set to Hardware (RTS/CTS).
MODEM_INIT. =
String of commands to be sent to the modem for setup. Used for
non-US Robotics modems.
BUSY_REDIAL. =
The number of additional attempts the AXIS 240 will make in
order to establish a connection in case the line is busy.
TCP_SERVPORT. = 0
The TCP port used together with the TCP driver.
TIME. =
The current time.
DATE_SERVER. = 0.0.0.0
IP address of the date server that provides the actual time and
date.
DATESYNC_PERIOD. = 0
The date and time will be automatically updated according to the
specified intervals.
DATESYNC_PROTOCOL. = TIME
The synchronization protocol used. Time (serial port 37),
Daytime (serial port 13) or NTP (UDP port 123).
DATESYNC_TIME_ZONE. = 0
The time zone adjustment as number of hours +/- UTC.
TIMEADJ_WEEK. = 0
The time adjustment per week. Valid range is 0 to (-)32000
seconds.
WATCHDOGTIME. = 12000
Do not change.
INDEX_FILE. = INDEX
Do not change.
Video parameters
DEFAULT_CAM. = 1
Specifies the default camera and enables video modulation
detection. Do not change.
CAM1. = 0
Enables the camera 1 input.
Parameter name Value Description