User Manual

AXIS 240 Users Manual Appendix B: The Parameter List
75
Appendix B The Parameter List
This appendix contains a listing of the AXIS 240 configuration
parameters and also describes how to restore the factory default
settings for the unit.
The Configuration File
This table shows the AXIS 240 parameter list. The left and middle
columns show the parameter names and their default values as they
appear in the config file. The right column contains brief descriptions
of the parameters.
Parameter name Value Description
--- CONFIG MENU
NODE_ADDR. = 00 40 8C 18 00 86
Node address. Use when the unit is configured. Cannot be
changed.
ROOT_PWD. = PASS
Root password. Always change the default password.
USERS. =
User names and passwords of users that are authorized to
access the pictures taken by the AXIS 240. If empty, all users
have full access.
--- TCPIP MENU
TCP_ENB. = YES
Enables the TCP protocol.
INT_ADDR. = 0.0.0.0
The AXIS 240 IP address.
DEF_ROUT. = 0.0.0.0
All traffic directed outside the local network (according to the
NetMask) is sent to the default router. Any re-routing via other
routers is done automatically. The default 0.0.0.0 indicates that
no default router is set.
DNS1_ADDR. = 0.0.0.0
The IP address of the primary DNS server, identifying computers
with names instead of IP addresses.
DNS2_ADDR. = 0.0.0.0
The IP address of the secondary DNS server.
MAIL_SERVER_ADDR. = 0.0.0.0
Name of the server that provides e-mail facilities.
RETURN_PATH. =
The reply address for e-mails sent by the AXIS 240.
NET_MASK. = 0.0.0.0
Used to determine when the traffic should be sent via a router.
For example the normal class C mask is 255.255.255.0. The
default 0.0.0.0 indicates that automatic router sensing is used.
BOOTP_ENB. = yes
Enables BOOTP IP address setup.
RARP_ENB. = yes
Enables RARP IP address setup.